Clean Room Monitoring Equipment

Product Details:

Description:-The Clean Room Oxygen Monitor – CRM-111-2 is the latest upgraded, flush mounted monitoring equipment specifically for continuous monitoring of oxygen gas concentrations at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospitals & Meteorological industries.

Salient features:-
• LED display Indication for O2 indication.
• User Programmable Alarm for O2.
• In built Buzzer for Alarm set points with Acknowledgment facility.
• Software calibration facility.
• Password protected programming.
• Isolated RS-485 communication with Modbus RTU Protocol.


Technical Specifications:-
• Sensors : Integrated Oxygen Sensor
• Oxygen : Range: 0 to 25% V/V, 0.01 Resolution
• Accuracy :- Oxygen (O2) : ± 2% of FS
• Display : 4 digit Seven Segment 0.4” Red LED display for O2 indication
• Status indication : 2 LEDs for Alarms; Integrated Buzzer for process violation of Alarm limits .
• Communication : Isolated RS-485 communication with Modbus RTU Protocol
• Programmable parameter : 9600 bps, Parity, Data bits, Stop bits
• Set point : 2 Nos. AL1, AL2 User Programmable; Programming of parameters : 3 Nos. push button front keys (with password protection)
• Alarm logic : High or Low, user programmable
• Operating Ambient Temp. : 0 to 50°C
• Humidity : Below 90% RH, Non condensing.
• Supply voltage : 24VDC ± 10%
• Power consumption : Less than 1.2 watt at 24VDC
• Flush mounting plate : SS-304
• Front plate size : 110 mm(W) x90 mm(H)
• Back enclosure : 76 mm (W) x70mm(H) x45mm(D); MS with powder coated
• Mounting : Modular wall mounting with Stainless Steel Front.

Additional Information:

• Item Code: CRM-111-2
• Production Capacity: 500
• Delivery Time: within 2 week
• Packaging Details: depend on qty

Product Details:

We provide Clean Room Temperature- Relative Humidity- Differential Pressure Monitor to our clients.

Description:-The Clean Room Temperature, Relative Humidity, Differential Pressure Monitor – CRM-313 is the latest upgraded, flush mounted monitoring equipment which is used during and after mapping and validation processes for analyzing and continuous monitoring at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospitals & Meteorological industries.

Salient features:-
•LED display Indication for Temperature , Humidity and Differential Pressure at a time.
•Remote Temperature and RH sensor Connection facility.
•Independent Programmable alarm for Temperature, Humidity and Differential Pressure.
•In built Buzzer for Alarm set points with acknowledgment facility
•Software calibration facility.
•Password protected programming.
•Isolated RS-485 communication with Modbus RTU Protocol.


Technical Specifications:-
•Sensors : Integrated / Remote Humidity and Temperature Sensor, Built in differential pressure sensor with Brass Hose Nipples (Chrome Plated) for +Ve Pressure connection & -Ve Pressure connection
•Differential Pressure : Upper 4 digit Seven segments 0.4”- RED LED display
•Temperature : Middle 4 digit Seven segments 0.4” – RED LED display
•Humidity : Lower 4 digit Seven segments 0.4” – RED LED display
•Status indication : 3 LEDs for alarms ; Integrated Buzzer for process violation of alarm limits any of the 3 parameters.
•Communication: Isolated RS-485 communication with Modbus RTU Protocol
•Programmable parameter : 9600 bps, Parity, Data bits, Stop bits
•Set point : Programmable as per input selection
•Temperature Range: -30.0 °C to 50.0 °C
•Humidity Range: 0% to 100 % RH
•Display resolution : 0.1 for Temperature and RH
•Differential Pressure :1. Range: (-100 to 100); Resolution: mmWC, 0.1;2. Range: (-10 to 10); Resolution: cmWC, 0.1;3. Range: (-7.5 to 7.5); Resolution: mmHG, 0.1;4. Range: (-500 to 500); Resolution: Pascal, 1;5. Range: (-10 to 10); Resolution: Hectopascal, 0.1
•NOTE : Other Differential Pressure Range/Unit, Available on request, contact to factory.
•Accuracy:Temperature : ± 0.5% of FSHumidity : ± 2 % of FSDifferential Pressure : ± 1 % of FS
•Programming of parameters : 3 Nos. push button front keys (with password protection)
•Alarm logic : High or Low programmable
•Supply voltage : 24VDC ± 10%
•Power consumption : Less than 1.2 watt at 24VDC.


Applications:-• Clean room application in Pharmaceutical• Pharma Environments monitoring applications.• HVAC (Heating, ventilation, Air conditioning, Cooling).• Animal house clean room

Additional Information:

• Item Code: CRM-313
• Production Capacity: 500
• Delivery Time: within 2 week
• Packaging Details: Depend on qty

Product Details:

The RM 100 Room climate monitor is a smart, compact and easy-to-use device. In addition to measuring the CO2 concentration, the RM 100can also measure the ambient temperature and the relative humidity (CO2+Temp.+rH).

Features:

· Large, illuminated display.

· Three different LEDs show the current Indoor Air Quality value as good, medium or bad, respectively.

· Built-in LCD backlight for easy reading in the dark.

· Measurements of air temperature, humidity and CO 2 value

· MUTE button for alarm on/off; Alarming when limit is exceeded.

· Factory calibration certificate as a proof of accuracy and reliability of device.

 

Applications:

This product is developed to help people taking care of the Indoor Air Quality.
The RM 100 can be widely used in office buildings, schools, exhibition halls, shopping malls, meeting rooms, fitness centers, restaurants and other public places where personal comfort and a healthy environment is important.

Additional Information:

• Item Code: RM100

Product Details:

Description:-The Clean Room Temperature & humidity Monitor CRM-212 is the latest upgraded, flush mounted monitoring equipment designed for continuous TRH monitoring at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospitals & Meteorological industries.

Salient features:-
•LED display Indication for Temperature, Humidity.
•Remote Temperature and RH sensor Connection facility.
•Independent Programmable Alarm for Temperature, Humidity user programmable.
•In built Buzzer for Alarm set points with Acknowledgment facility.
•Software calibration facility.
•Password protected programming.
•Isolated RS-485 communication with Modbus RTU Protocol.

Additional Information:

• Item Code: CRM-212
• Production Capacity: 500
• Delivery Time: within 10 working days
• Packaging Details: depend on qty

Product Details:

We provide Clean Room Process Monitor to our clients.

Description:-The Clean Room Process Monitor CRM-485 is the latest upgraded, flush mounted monitoring equipment designed for continuous monitoring at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospitals & Meteorological industries.

Salient features:-
• Multi-drop connection, saves cabling
• Ring Topology possibility for Redundancy
• One Second Scan time for each slave
• Password protected programming
• Isolated RS-485 communication ports
• 2 optional relays
• Easy programming with 3 keys on front panel
• Built-in Buzzer/Relay for alarm set points with alarm acknowledgement facility.


Technical Specifications:-


• Input :- RS-485 : 1 No. Slave device with Modbus-RTU protocol
• Range : User settable within 4 digits(-999 to 9999)
• Resolution : 1, 0.1, 0.01, 0.001
• Display : 2×4 digit Seven Segment 0.4” Red LED display
• Status : 2 LEDs AL1 and AL2 for Alarms and COM; LED for communication; Integrated Buzzer for process violation of Alarm Limits
• Communication To Modbus Master: Isolated RS-485 communication with Modbus RTU Protocol
• Programmable Settings: Baud rate (9600), Parity(O/E/N) Data bits(7/8) Stop bits(1/2)
• No of Slave ID : 1 – 250
• Error Monitoring: Indications: Over/ Open / Read error
• Optional Relay : 1 No. SPDT Relay for Rating “2A/120VAC, 2A/24VDC” for each channel with settable latching feature
• Set point : 2 Nos. AL1, AL2 User Programmable
• Setting : 3 Nos. push button front keys (with password protection)
• Alarm Logic : High or Low, user programmable
• Operating Temp: 0 to 50°C
• Humidity : Below 90% rH, Non condensing
• Supply Voltage : 24VDC ±10%
• Wattage : Less than 1.2 watt at 24VDC
• Flush plate : SS-304
• Front plate size: 110mm(W) x 90mm(H)
• Back Enclosure: 76mm(W) x 70 mm(H) x 45mm(D) MS with powder coating
• Mounting : Modular wall mounting with Stainless Steel Front



Applications:-• Clean room application in Pharmaceutical• Pharma Environments monitoring applications.• HVAC (Heating, ventilation, Air conditioning, Cooling).• Animal house clean room

Additional Information:

• Item Code: CRM-485
• Production Capacity: 500
• Delivery Time: 2 week
• Packaging Details: Back enclosure : 70mm (H) x76mm(W) x45mm(D) MS with powder coated Front plate size : 90 mm(H) x 110 mm(W) Flush mounting plate : SS-304 Overall size : 90 mm (H) x 110 mm (W) x 43mm (D)

Product Details:

Description:-The Clean Room Differential Pressure Monitor CRM-111-1 is the latest upgraded, flush mounted monitoring equipment designed for continuous monitoring of Differential Pressure at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospital industries and can be integrated with HVAC systems.

Technical Specifications:-

•Display : 4 digit Seven Segment 0.4” Red LED display for Differential Pressure Indication
•Status indication : 2 LEDs for Alarms; Integrated Buzzer for process violation of Alarm limits.
•Sensors : Integrated Differential Pressure Sensor;
•Range: (-100 to 100) mmWC, Resolution: 0.1
•Range: (-10 to 10) cmWC, Resolution: 0.1
•Range: (-7.5 to 7.5) mmHG, Resolution: 0.1
•Range: (-1000 to 1000) Pascal, Resolution: 1
•Range: (-10 to 10) Hectopascal, Resolution: 0.1
•NOTE : Other Differential Pressure Range/Unit, Available on request, contact to factory.
•Accuracy:- Differential Pressure : ± 1 % of FS
•Communication : Isolated RS-485 communication with Modbus RTU Protocol
•No. of salve ID : 1-250
•Programmable parameter : 9600 bps, Parity, Data bits, Stop bits
•Set point: 2Nos. AL1, AL2 User Programmable
•Programming of parameters : 3 Nos. push button front keys (with password protection)
•Alarm logic : High or Low, user programmable
•Operating Ambient Temp. : 0 to 50°C
•Humidity : Below 90% RH, Non condensing.
•Supply voltage : 24VDC ± 10%
•Power consumption : Less than 1.2 watt at 24VDC
•Flush mounting plate : SS-304
•Front plate size : 110 mm(W) x90 mm(H)
•Back enclosure : 76 mm (W) x70mm(H) x45mm(D); MS with powder coated
•Mounting : Modular wall mounting with Stainless Steel Front

Applications:-
• Clean room application in Pharmaceutical• Pharma Environments monitoring applications.• HVAC (Heating, ventilation, Air conditioning, Cooling).• Animal house clean room

Additional Information:

• Item Code: CRM-111-1
• Production Capacity: 500
• Delivery Time: within 2 week
• Packaging Details: Depend on qty

Product Details:

Description:-The Clean Room Combustible Monitor – CRM-111-3 is the latest upgraded, flush mounted monitoring equipment specifically for continuous monitoring of combustible gas concentrations at research labs, cold storage warehouses in industries like Pharma manufacturing & packaging, Animal Housing, Hospitals & Meteorological industries.

Salient features:-
• LED display Indication for Combustible Gas Concentration indication.• User Programmable Alarm.• In built Buzzer for Alarm set points with Acknowledgment facility.• Software calibration facility.• Password protected programming.• Isolated RS-485 communication with Modbus RTU Protocol.
Technical Specifications:-


• Display : 4 digit Seven Segment 0.4” Red LED display for gas concentration indication
• Status indication : 2 LEDs for Alarms; Integrated Buzzer for process violation of Alarm limits
• Sensors : Catalytic / Pellistor type sensors
• Range: 0 to 100% LEL (Please check Product Catalogue for combustible gas type & details)
• Accuracy: ± 3% of FS
• Communication : Isolated RS-485 communication with Modbus RTU Protocol
• Set point : 2 Nos. AL1, AL2 User Programmable; Programming of parameters : 3 Nos. push button front keys (with password protection)
• Programmable parameter : 9600 bps, Parity, Data bits, Stop bits
• Alarm logic : High or Low, user programmable
• Operating Ambient Temp. : 0 to 50°C
• Humidity : Below 90% RH, Non condensing.
• Supply voltage : 24VDC ± 10%
• Power consumption : Less than 1.2 watt at 24VDC
• Flush mounting plate : SS-304
• Front plate size : 110 mm(W) x90 mm(H)
• Back enclosure : 76 mm (W) x70mm(H) x45mm(D); MS with powder coating.
• Mounting : Modular wall mounting with Stainless Steel Front


Applications:-• Clean room application in Pharmaceutical• Pharma Environments monitoring applications.• HVAC (Heating, ventilation, Air conditioning, Cooling).• Animal house clean room

Additional Information:

• Item Code: CRM-111-3