Gas Transmitters

Product Details:

GT-1033-FLP ( Loop powered transmitter Oxygen Flameproof)
Features :- 
• Industrial Standard, 4-20mA output with Respect to Gas Concentration.
• Loop Test, Assures Proper Operation of the Transmitter without Calibration Gas
• Easy Programming with Password Protection.
• Fast Response, Easy to Read Display.
• Easy to Replace Sensor Module; On Field Plug-N-Play module.
• Reverse Polarity Protection.
• No Additional Power Required.
• Highly Reliable, Fast, Accurate for Specific Gas Detection.
• Excellent Long Term Stability.
• User Friendly, Simple to Operate & Easy to Install.
• Reduced Operating, Maintenance and Installation Cost, One Man Calibration.
• Sensor Open/ Over Range Indication.
• Inhibit mode for service purpose, current output settable as per the requirement.
• EMC compliance to IEC – 61000-4 standards. 
Application:- 
•Gas Metering skid •Gas Cylinder Bank •Oil & Gas Industries •Gas Pipeline Project •Refineries •Cold Storage •Sewage Plants •Fertilizers Plants •Stack Monitoring •Chlorination Plant •Ambient Monitoring •Pulp & Paper Plants •Control Atmosphere •Heat Treatment Plants •Chemical Processing Plant •Acid Alkalize & Dyes mfg. Plants •Offshore Drilling & Processing Platform •Chemical Storage Area •Coal Mine and Confined Area •Power & Industrial Plants •Bullets Yards / Storage Yard •Chemical & Petrochemical Plants •Gas Metering Station Burner / Furnace Areas •Automotive Industrial/Paints Shops

Additional Information:

• Delivery Time: one week

Product Details:

 Smart Gas transmitter Combustible Flameproof with Buzzer Cum Flasher In SS Enclosure
Features:- 
· Provides a fast reliable output for detection a smallest leak of Oxygen, Toxic, Combustible Gases and Volatile Organic Compounds (VOC).
· Provision for smart – Pluggable gas sensor module for Oxygen, Toxic, Combustible, PID & NDIR sensors.
· Calibration data, Alarm data, Offset data, Output current data is saved in the particular sensor module, for easy maintenance & servicing.
· Highly resistant to poisoning and etching. · Capable of detecting down to PPM, %V/V, %LEL, PPB, mg/m3, ug/m3. · Digital display of Gas Concentration on LCD Display
· Indication for 'Sensor Open', 'Over Range', 'Sensor Replace', 'Cal Due', 'Cal Fail', mA Loop Open.
· Standard 4-20mA signal output with configurable range. · Standard 0-10V/0-5V/ 0-1V signal output with configurable range.
· Optional STEL and TWA set points can be configured for Toxic & VOC Gases.
· Optional RS-485 Communication Port with MODBUS RTU PROTOCOL.
· Non - Intrusive programming for Flameproof Model using Magnetic Wand.
· Password protected programming with Password Changing Facility.
· Alarm Acknowledgement Facility from front as well as rare terminal.
· 'Test Mode' provided to check the electronics as Alarm LEDs, Relays, Output current/voltage with or without sensor module.
· Optional Alarm Relay contacts on board with two configurable Alarm Levels & One Fail Safe Relay.
Application:- 
• Refineries
• Cold Storage
• Sewage Plants
• Fertilizers Plants
• Stack Monitoring
• Chlorination Plant
• Gas Cylinder Bank
• Ambient Monitoring
• Gas Metering skid
• Gas Metering Station
• Pulp & Paper Plants
• Bullets Yards/ storage yards 
• Chemical Processing Plant • Heat Treatment Plants
• Chemical Storage Area
• Power & Industrial Plants
• Acid Alkalizes & Dyes Mfg. Plants
• Coal Mine and Confined Area
• Chemical & Petrochemical Plants
• Gas Pipeline Project
• Oil & Gas Industries
• Burner / Furnace Areas
• Control Atmosphere
• Automotive Industries / Paint Shops 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7 days from the Receipt of Purchase Order
• Packaging Details: 1. Packing List 2. Calibration Certificate 3. Double Compression Glands - PESO Certificate 4. Stopper - PESO Certificate 5. Allen Key & Screws

Product Details:

Features:- 
• Provides a fast and reliable output by using Electro Chemical /Pellister Sensor Technology.• Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases.• Highly resistant to poisoning and etching.• Capable of detecting down to PPM, %LEL & %V/V.• Digital display of Gas Concentration on L.C.D. Display• Standard 4-20mA signal output with configurable range• Easy handling and programming with 3 keys for WeatherproofModels.• Password protected programming with passwordchanging facility• One man Auto Software Gas Calibration• Optional Alarm relay contacts with two configurable Alarmlevels & one Relay for fail safe relay.• Optional STEL and TWA set points can be configuredfor Toxic Gases• Optional RS-485 communication port withMODBUS RTU Protocol.

Application:- 

• Gas Metering Skid• Gas Cylinder Bank• Oil & Gas Industries• Gas Pipeline Project• Refineries• Cold Storage• Sewage Plants• Fertilizers Plants• Stack Monitoring• Chlorination Plant• Ambient Monitoring• Pulp & Paper Plants• Gas Metering Station• Burner / Furnace Areas• Bullet Yard / Storage Yard• Chemical Processing Plant• Acid Alkalizes & Dyes Mfg. Plants• Offshore Drilling & ProcessingPlatforms• Heat Treatment Plants• Chemical Storage Area• Control Atmosphere•  Power & Industrial Plants•  Coal Mine and Confined Area•  Chemical & Petrochemical Plants•  Automotive Industries / Paint Shops

Additional Information:

• Production Capacity: 1000
• Delivery Time: 7 days from the Receipt of Purchase Order
• Packaging Details: 1. Packing List 2. Calibration Certificate 3. Double Compression Glands - PESO Certificate 4. Stopper - PESO Certificate 5. Allen Key & Screws

Product Details:

GT - 2500 - WP  ( Smart Gas Transmitter Toxic Weatherproof)
Features:- 
• Provides a fast and reliable output by using Electro Chemical / Pellister Sensor Technology.
• Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases.
• Highly resistant to poisoning and etching.
• Capable of detecting down to PPM, %LEL & %V/V
• Digital display of Gas Concentration on L.E.D. Display
• Standard 4-20mA signal output with configurable range
• Easy handling and programming with 3 keys for Weatherproof Models.
• Password protected programming with password changing facility
• One man Auto Software Gas Calibration
• Optional Alarm relay contacts with two configurable Alarm levels & one Relay for fail safe relay.
• Optional STEL and TWA set points can be configured for Toxic Gases
• Optional RS-485 communication port with MODBUS RTU Protocol

APPLICATIONS:- 
• Gas Metering Skid • Gas Cylinder Bank • Oil & Gas Industries • Gas Pipeline Project • Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Ambient Monitoring • Pulp & Paper Plants • Gas Metering Station • Burner / Furnace Areas • Bullet Yard / Storage Yard • Chemical Processing Plant • Acid Alkalizes & Dyes Mfg. Plants • Offshore Drilling & Processing Platforms • Heat Treatment Plants • Chemical Storage Area • Control Atmosphere • Power & Industrial Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Automotive Industries / Paint Shops 

Additional Information:

• Delivery Time: one week

Product Details:

GT - 2500 - WP ( Smart Gas Transmitter Combustible Weatherproof)

Features:- 
• Provides a fast and reliable output by using Electro Chemical / Pellister Sensor Technology.
• Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases.
• Highly resistant to poisoning and etching. • Capable of detecting down to PPM, %LEL & %V/V
• Digital display of Gas Concentration on L.E.D. Display
• Standard 4-20mA signal output with configurable range
• Easy handling and programming with 3 keys for Weatherproof Models.
• Password protected programming with password changing facility
• One man Auto Software Gas Calibration
• Optional Alarm relay contacts with two configurable Alarm levels & one Relay for fail safe relay.
• Optional STEL and TWA set points can be configured for Toxic Gases
• Optional RS-485 communication port with MODBUS RTU Protocol

Application:- 
• Gas Metering Skid • Gas Cylinder Bank • Oil & Gas Industries • Gas Pipeline Project • Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Ambient Monitoring • Pulp & Paper Plants • Gas Metering Station • Burner / Furnace Areas • Bullet Yard / Storage Yard • Chemical Processing Plant • Acid Alkalizes & Dyes Mfg. Plants • Offshore Drilling & Processing Platforms • Heat Treatment Plants • Chemical Storage Area • Control Atmosphere • Power & Industrial Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Automotive Industries / Paint Shops

Additional Information:

• Delivery Time: ONE WEEK

Product Details:

GT-2511-WP (Smart Gas Transmitter Oxygen Weatherproof)
Features:- 
• Provides a fast and reliable output by using Electro Chemical / Pellister Sensor Technology.
• Optimized for detection of smallest leak of Oxygen, Toxic and Combustible Gases.
• Highly resistant to poisoning and etching.
• Capable of detecting down to PPM, %LEL & %V/V.
• Digital display of Gas Concentration on L.C.D. Display
• Standard 4-20mA signal output with configurable range
• Easy handling and programming with 3 keys for Weatherproof Models.
• Password protected programming with password changing facility
• One man Auto Software Gas Calibration
• Optional Alarm relay contacts with two configurable Alarm levels & one Relay for fail safe relay.
• Optional STEL and TWA set points can be configured for Toxic Gases
• Optional RS-485 communication port with MODBUS RTU Protocol.
Application:- 
• Gas Metering Skid • Gas Cylinder Bank • Oil & Gas Industries • Gas Pipeline Project • Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Ambient Monitoring • Pulp & Paper Plants  • Gas Metering Station • Burner / Furnace Areas • Bullet Yard / Storage Yard • Chemical Processing Plant • Acid Alkalizes & Dyes Mfg. Plants • Offshore Drilling & Processing Platforms • Heat Treatment Plants • Chemical Storage Area • Control Atmosphere • Power & Industrial Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Automotive Industries / Paint Shops

Additional Information:

• Delivery Time: one week

Product Details:

GT-2511-FLP-HCF-JB-150 ( Smart Gas transmitter Combustible Flameproof with Buzzer Cum Flasher With Multiple Glands)

Features:- 
• Provides a fast reliable output for detection a smallest leak of Oxygen, Toxic, Combustible Gases and Volatile Organic Compounds (VOC).
• Provision for smart – Pluggable gas sensor module for Oxygen, Toxic, Combustible, PID & NDIR sensors.
• Calibration data, Alarm data, Offset data, Output current data is saved in the particular sensor module, for easy maintenance & servicing.
• Highly resistant to poisoning and etching.
• Capable of detecting down to PPM, %V/V, %LEL, PPB, mg/m3, ug/m3.
• Digital display of Gas Concentration on LCD Display
• Indication for 'Sensor Open', 'Over Range', 'Sensor Replace', 'Cal Due', 'Cal Fail', mA Loop Open. • Standard 4-20mA signal output with configurable range.
• Standard 0-10V/0-5V/ 0-1V signal output with configurable range.
• Optional STEL and TWA set points can be configured for Toxic & VOC Gases.
• Optional RS-485 Communication Port with MODBUS RTU PROTOCOL.
• Non-Intrusive programming for Flameproof Model using front push button.
• Password protected programming with Password Changing Facility.
• Alarm Acknowledgment Facility from front as well as rear terminal.
• 'Test Mode' provided to check the electronics as Alarm LEDs, Relays, Output current/voltage with or without sensor module.
• Optional Alarm Relay contacts on board with two configurable Alarm Levels & One Fail Safe Relay.

Application:- 

• Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Gas Cylinder Bank • Ambient Monitoring • Gas Metering skid • Gas Metering Station • Pulp & Paper Plants • Bullets Yards/ storage yards • Chemical Processing Plant • Heat Treatment Plants • Chemical Storage Area • Power & Industrial Plants • Acid Alkalizes & Dyes Mfg. Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Gas Pipeline Project • Oil & Gas Industries • Burner / Furnace Areas • Control Atmosphere • Automotive Industries / Paint Shops

Additional Information:

• Delivery Time: one week

Product Details:

GT-1033-WP ( Loop powered transmitter Oxygen Weatherproof)
Features:- 
• Industrial Standard, 4-20mA output with Respect to Gas Concentration.
• Loop Test, Assures Proper Operation of the Transmitter without Calibration Gas
• Easy Programming with Password Protection.
• Fast Response, Easy to Read Display.
• Easy to Replace Sensor Module; On Field Plug-N-Play module.
• Reverse Polarity Protection.
• No Additional Power Required.
• Highly Reliable, Fast, Accurate for Specific Gas Detection.
• Excellent Long Term Stability.
• User Friendly, Simple to Operate & Easy to Install.
• Reduced Operating, Maintenance and Installation Cost, One Man Calibration.
• Sensor Open/ Over Range Indication.
• Inhibit mode for service purpose, current output settable as per the requirement.
• EMC compliance to IEC – 61000-4 standards. 
Application:- 
•Gas Metering skid •Gas Cylinder Bank •Oil & Gas Industries •Gas Pipeline Project •Refineries •Cold Storage •Sewage Plants •Fertilizers Plants •Stack Monitoring •Chlorination Plant •Ambient Monitoring •Pulp & Paper Plants •Control Atmosphere •Heat Treatment Plants •Chemical Processing Plant •Acid Alkalize & Dyes mfg. Plants •Offshore Drilling & Processing Platform •Chemical Storage Area •Coal Mine and Confined Area •Power & Industrial Plants •Bullets Yards / Storage Yard •Chemical & Petrochemical Plants •Gas Metering Station Burner / Furnace Areas •Automotive Industrial/Paints Shops

Additional Information:

• Delivery Time: one week

Product Details:

GT -2500 - FLP ( Smart Gas Transmitter Combustible Flameproof)
Features:- 
• Provides a fast reliable output for detection a smallest leak of Oxygen, Toxic, Combustible Gases and Volatile Organic Compounds (VOC).
• Provision for smart – Pluggable gas sensor module for Oxygen, Toxic, Combustible, PID & NDIR sensors.
• Calibration data, Alarm data, Offset data, Output current data is saved in the particular sensor module, for easy maintenance & servicing.
• Highly resistant to poisoning and etching.
• Capable of detecting down to PPM, %V/V, %LEL, PPB, mg/m3, ug/m3.
• 2-Line, 4-Digit 8 mm (H) Seven Segment LED Display & 8 LEDs to indicate status of instrument
• Indication for 'Sensor Open', 'Over Range', 'Sensor Replace', 'Cal Due', 'Cal Fail', mA Loop Open.
• Standard 4-20mA signal output with configurable range.
• Standard 0-10V/0-5V/ 0-1V signal output with configurable range.
• Optional STEL and TWA set points can be configured for Toxic & VOC Gases.
• Optional RS-485 Communication Port with MODBUS RTU PROTOCOL.
• Non - Intrusive programming for Flameproof Model using Magnetic Wand.
• Password protected programming with Password Changing Facility.
• Alarm Acknowledgement Facility from front as well as rare terminal.
• 'Test Mode' provided to check the electronics as Alarm LEDs, Relays, Output current/voltage with or without sensor module.
• Optional Alarm Relay contacts on board with two configurable Alarm Levels & One Fail Safe Relay. 

APPLICATIONS:-
• Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Gas Cylinder Bank • Ambient Monitoring • Gas Metering skid • Gas Metering Station • Pulp & Paper Plants • Bullets Yards/ storage yards • Chemical Processing Plant • Heat Treatment Plants • Chemical Storage Area • Power & Industrial Plants • Acid Alkalizes & Dyes Mfg. Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Gas Pipeline Project • Oil & Gas Industries • Burner / Furnace Areas • Control Atmosphere • Automotive Industries / Paint Shops

Additional Information:

• Delivery Time: one week

Product Details:

GT-2511-FLP ( Smart Gas Transmitter Oxygen flameProof)
Features:- 
 Provides a fast reliable output for detection a smallest leak of Oxygen, Toxic, Combustible Gases and Volatile Organic Compounds (VOC).
· Provision for smart – Pluggable gas sensor module for Oxygen, Toxic, Combustible, PID & NDIR sensors.
· Calibration data, Alarm data, Offset data, Output current data is saved in the particular sensor module, for easy maintenance & servicing.
· Highly resistant to poisoning and etching.
· Capable of detecting down to PPM, %V/V, %LEL, PPB, mg/m3, ug/m3.
· Digital display of Gas Concentration on LCD Display · Indication for 'Sensor Open', 'Over Range', 'Sensor Replace', 'Cal Due', 'Cal Fail', mA Loop Open.
· Standard 4-20mA signal output with configurable range.
· Standard 0-10V/0-5V/ 0-1V signal output with configurable range.
· Optional STEL and TWA set points can be configured for Toxic & VOC Gases.
· Optional RS-485 Communication Port with MODBUS RTU PROTOCOL.
· Non - Intrusive programming for Flameproof Model using Magnetic Wand.
· Password protected programming with Password Changing Facility. · Alarm Acknowledgement Facility from front as well as rare terminal.
· 'Test Mode' provided to check the electronics as Alarm LEDs, Relays, Output current/voltage with or without sensor module.
· Optional Alarm Relay contacts on board with two configurable Alarm Levels & One Fail Safe Relay.
Application:- 
• Refineries • Cold Storage • Sewage Plants • Fertilizers Plants • Stack Monitoring • Chlorination Plant • Gas Cylinder Bank • Ambient Monitoring • Gas Metering skid • Gas Metering Station • Pulp & Paper Plants • Bullets Yards/ storage yards , • Chemical Processing Plant • Heat Treatment Plants • Chemical Storage Area • Power & Industrial Plants • Acid Alkalizes & Dyes Mfg. Plants • Coal Mine and Confined Area • Chemical & Petrochemical Plants • Gas Pipeline Project • Oil & Gas Industries • Burner / Furnace Areas • Control Atmosphere • Automotive Industries / Paint Shops

Additional Information:

• Delivery Time: one week